Agilent E8363C PNA Upgrade Kits

The cost of installation, adjustments, calibration (if necessary), and return shipping is included in the price of all upgrade kits. Customers are responsible for incoming shipping charges. No price discounts are provided for customers performing their own work.
Upgrades are ordered using the PNA model number followed by a "U" as shown in the product number column below.
When Agilent will be performing the hardware upgrade, the customer should take delivery of the upgrade kit, contact Agilent for an RMA and shipping instructions, then send in the kit and the PNA as instructed.
Upgrade kits listed as installed by customers consist of only a license. No adjustments or calibration are required.
The parts in our upgrade kits come with a 90-day warranty against any manufacturing defect. The warranty period of the instrument into which they are installed is not affected.

Product Number Description Type Upgrade Contents Minimum Firmware Minimum Hardware Required Options Before Upgrade Adjustments
required after
installation Installed by Installation note

E8363CU-010 Add Time Domain Operation Software License None None None None Customer pdf

E8363CU-014 Add Configurable Test Set Hardware Hardware Kit None None None Source Adjust
Receiver Adjust Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments pdf

E8363CU-016 Add Receiver Attenuators Hardware Hardware Kit None Option UNL None Source Adjust
Receiver Adjust Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments pdf

E8363CU-050 Upgrade E8363C to E8364C
See Model Change Note Hardware Hardware Kit None None None Source Adjust
Receiver Adjust
New Licenses Req'd Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments pdf

E8363CU-067 Upgrade E8363C without 014 to E8361C
See Model Change Note Hardware Hardware Kit None None None Source Adjust
Receiver Adjust
New Licenses Req'd Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments pdf

E8363CU-068 Upgrade E8363C with 014 to E8361C
See Model Change Note Hardware Hardware Kit None Option 014 None Source Adjust
Receiver Adjust
New Licenses Req'd Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments pdf

E8363CU-080 Add Frequency Offset Mode Hardware Hardware Kit None None 014 Source Adjust
Receiver Adjust Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments pdf

E8363CU-081 Add Reference Mixer Transfer Switches Hardware Hardware Kit None None 014,080 Source Adjust
Receiver Adjust Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments pdf

E8363CU-082 Add Scalar Calibrated Converter Measurements Software License None None 014,080 None Customer pdf

E8363CU-083 Add Vector and Scalar Calibrated Converter Measurements Software License None None 014,080,081 None Customer pdf

E8363CU-084 Add Embedded LO Measurements Software License A.07.50 1.1 GHz CPU None None Customer pdf

E8363CU-550 Add Full 4 Port Capability Software License A.06.01 None None None Customer pdf

E8363CU-551 Add Full N-Port Capability Software License A.07.12 None None None Customer pdf

E8363CU-897 Add built-in performance test software for Agilent inclusive calibration, perpetual license Software License None None None None Customer pdf

E8363CU-898 Add built-in performance test software for standards compliant calibration, perpetual license Software License None None None None Customer pdf

E8363CU-H08 Add Pulsed RF Measurement Capability Software License None None 014,080,081,H11,UNL None Customer pdf

E8363CU-H11 Add IF Access Hardware Hardware Kit None None 014,080,081,UNL Source Adjust
Receiver Adjust Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments pdf

E8363CU-UNL Add Source Attn & Bias Tees Hardware Hardware Kit None None None Source Adjust
Receiver Adjust Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments pdf

Product Number	Description	Type	Upgrade Contents	Minimum Firmware	Minimum Hardware	Required Options Before Upgrade	Adjustments required after installation	Installed by	Installation note
E8363CU-010	Add Time Domain Operation	Software	License	None	None	None	None	Customer	pdf
E8363CU-014	Add Configurable Test Set	Hardware	Hardware Kit	None	None	None	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments	pdf
E8363CU-016	Add Receiver Attenuators	Hardware	Hardware Kit	None	Option UNL	None	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments	pdf
E8363CU-050	Upgrade E8363C to E8364C See Model Change Note	Hardware	Hardware Kit	None	None	None	Source Adjust Receiver Adjust New Licenses Req'd	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments	pdf
E8363CU-067	Upgrade E8363C without 014 to E8361C See Model Change Note	Hardware	Hardware Kit	None	None	None	Source Adjust Receiver Adjust New Licenses Req'd	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments	pdf
E8363CU-068	Upgrade E8363C with 014 to E8361C See Model Change Note	Hardware	Hardware Kit	None	Option 014	None	Source Adjust Receiver Adjust New Licenses Req'd	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments	pdf
E8363CU-080	Add Frequency Offset Mode	Hardware	Hardware Kit	None	None	014	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments	pdf
E8363CU-081	Add Reference Mixer Transfer Switches	Hardware	Hardware Kit	None	None	014,080	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments	pdf
E8363CU-082	Add Scalar Calibrated Converter Measurements	Software	License	None	None	014,080	None	Customer	pdf
E8363CU-083	Add Vector and Scalar Calibrated Converter Measurements	Software	License	None	None	014,080,081	None	Customer	pdf
E8363CU-084	Add Embedded LO Measurements	Software	License	A.07.50	1.1 GHz CPU	None	None	Customer	pdf
E8363CU-550	Add Full 4 Port Capability	Software	License	A.06.01	None	None	None	Customer	pdf
E8363CU-551	Add Full N-Port Capability	Software	License	A.07.12	None	None	None	Customer	pdf
E8363CU-897	Add built-in performance test software for Agilent inclusive calibration, perpetual license	Software	License	None	None	None	None	Customer	pdf
E8363CU-898	Add built-in performance test software for standards compliant calibration, perpetual license	Software	License	None	None	None	None	Customer	pdf
E8363CU-H08	Add Pulsed RF Measurement Capability	Software	License	None	None	014,080,081,H11,UNL	None	Customer	pdf
E8363CU-H11	Add IF Access	Hardware	Hardware Kit	None	None	014,080,081,UNL	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments	pdf
E8363CU-UNL	Add Source Attn & Bias Tees	Hardware	Hardware Kit	None	None	None	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments	pdf

Model Change Note:
Please note that existing software licenses are no longer valid when the model number is changed. Please contact the Component Test Division to have new software licenses issued.

For additional information, contact the support email node.

Return to the PNA Family Service Homepage

Last Updated: 01 August 2008