Search: in all of Agilent.com Automated Test Equipment Communications Solutions Life Sciences/Chemical Semiconductor Products Test & Measurement

Products & Services Industries Customer Center About Agilent

Agilent Home > Products & Services > Test & Measurement > RF & Microwave Instruments & Systems > Network Analyzers > PNA Series > PNA Support > Option Upgrades

Agilent N5244A PNA-X Upgrade Kits

• The cost of installation, adjustments, calibration (if necessary), and return shipping is included in the price of all upgrade kits. Customers are responsible for incoming shipping charges. No price discounts are provided for customers performing their own work.
• Upgrades are ordered using the PNA model number followed by a "U" as shown in the product number column below.
• When Agilent will be performing the hardware upgrade, the customer should take delivery of the upgrade kit, contact Agilent for an RMA and shipping instructions, then send in the kit and the PNA as instructed.
• Upgrade kits listed as installed by customers consist of only a license. No adjustments or calibration are required.
• The parts in our upgrade kits come with a 90-day warranty against any manufacturing defect. The warranty period of the instrument into which they are installed is not affected.

Product Number	Description	Type	Upgrade Contents	Minimum Firmware	Minimum Hardware	Required Options Before Upgrade	Adjustments required after installation	Installed by	Installation note
N5244AU-010	Add Time Domain Operation	Software	License	None	None	None	None	Customer	pdf
N5244AU-020	Add IF Inputs for Antenna and mm-Wave	Software	License	None	None	None	None	Customer	pdf
N5244AU-021	Add Pulse Modulator to 1st Internal Source	Software	License	None	None	None	None	Customer	pdf
N5244AU-022	Add Pulse Modulator to 2nd Internal Source	Software	License	None	None	None	None	Customer	pdf
N5244AU-025	Add Four Internal Pulse Generators	Software	License	None	None	None	None	Customer	pdf
N5244AU-080	Add Frequency Offset Mode	Software	License	None	None	None	None	Customer	pdf
N5244AU-082	Add Scalar Calibrated Converter Measurements	Software	License	None	None	080	None	Customer	pdf
N5244AU-083	Add Vector and Scalar Calibrated Converter Measurements	Software	License	None	None	080	None	Customer	pdf
N5244AU-084	Add Embedded LO Measurements	Software	License	A.07.50	None	None	None	Customer	pdf
N5244AU-086	Add Gain Compression Application	Software	License	A.08.00	None	None	None	Customer	pdf
N5244AU-087	Add Intermodulation Distortion Measurements	Software	License	A.08.00	None	224 or 423	None	Customer	pdf
N5244AU-118	Add Fast CW Mode	Software	License	None	None	None	None	Customer	pdf
N5244AU-460	Add Integrated TMSA Application	Software	License	A.08.00	None	None	None	Customer	pdf
N5244AU-510	Add Nonlinear Component Characterization	Software	License	A.08.00	None	400	None	Customer	pdf
N5244AU-514	Add Nonlinear X-Parameters	Software	License	A.08.00	None	400, 510	None	Customer	pdf
N5244AU-518	Add Nonlinear Pulse Envelope Domain	Software	License	A.08.00	None	400, 510, 514	None	Customer	pdf
N5244AU-520	Add Arbitrary Load Impedance for X-Parameters	Software	License	A.08.33	None	400, 510	None	Customer	pdf
N5244AU-551	Add N-Port Calibrated Measurements	Software	License	A.08.00	None	None	None	Customer	pdf
N5244AU-897	Add built-in performance test software for Agilent inclusive calibration, perpetual license	Software	License	None	None	None	None	Customer	pdf
N5244AU-898	Add built-in performance test software for standards compliant calibration, perpetual license	Software	License	None	None	None	None	Customer	pdf
N5244AU-H08	Add Pulsed RF Measurement Capability	Software	License	None	None	None	None	Customer	pdf
N5244AU-921	Add extended power range and bias-tees to 2 port analyzer (option 219 upgrade)	Hardware	Hardware Kit	None	None	200	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments (3.5 hr install; 4.5 hr cal)	pdf
N5244AU-922	Add internal second source, combiner and mechanical switches to 2-port analyzer (option 224 upgrade)	Hardware	Hardware Kit	None	None	200,219	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments (5.5 hr install; 4.5 hr cal)	pdf
N5244AU-926	Add extended power range and bias-tees to 4 port analyzer (option 419 upgrade)	Hardware	Hardware Kit	None	None	400	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments (3.5 hr install; 4.5 hr cal)	pdf
N5244AU-927	Add internal combiner and mechanical switches to 4-port analyzer (option 423 upgrade)	Hardware	Hardware Kit	None	None	400,419	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments (5.5 hr install; 4.5 hr cal)	pdf
N5244AU-940	Add 4-port operation to base 2-port analyzer (option 200 to 400 upgrade)	Hardware	Hardware Kit	None	None	200	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments (5.5 hr install; 4.5 hr cal)	pdf
N5244AU-942	Add 4-port operation to 2-port analyzer with option 219 (option 200,219 to 400,419 upgrade)	Hardware	Hardware Kit	None	None	200,219	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments (5.5 hr install; 4.5 hr cal)	pdf
N5244AU-944	Add 4-port operation to 2-port analyzer with option 224 (option 200,219,224 to 400,419,423 upgrade)	Hardware	Hardware Kit	None	None	200,219,224	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments (7.0 hr install; 4.5 hr cal)	pdf
N5244AU-990	Add 50 GHz operation (N5244A to N5245A upgrade)	Software	License	None	None	None	Source Adjust Receiver Adjust	Agilent Service Center or Customer Who Can Run Performance Tests & Adjustments (2.0 hr install; 4.5 hr cal)	pdf

Additional Options: Some options are listed in the About Network Analyzer dialog which are not shown above. Option 081, Reference Channel Transfer Switch, and 014, Configurable Test Set, come as standard equipment on all PNA-X analyzers. Option Pxx, Number of Test Ports, and Sxx, Number of Internal Sources, are determined by other hardware settings and are not user-settable. Options UNL and 016 are listed for cross-compatibility with other PNA option sets. These options are bundled together as option 219 or 419 on the PNA-X.

For additional information, contact the support email node.

Return to the PNA Family Service Homepage

Last Updated: 08 February 2010